BMW

Home / BMW / Page 3

We Service and Repair all BMW cars

  • 2011 BMW 335i

    BMW 335i
    Mileage
    187,508
    Service Date
    7/16/2024
    Services Performed
    • RECOMMENDED FRONT 35 REAR42 PRESSURE IN LF 29 RF 29 LR34 RR35 PRESSURE OUT LF35 RF35 LR42 RR42
    • CHECK OIL LEAKS AND ADVISE
    • CHECK BURNING OIL SMELL
    • VALVE COVER – Remove & Replace
    • BRAKE VACUUM PUMP – Remove & Replace – Sedan
    • ENGINE OIL FILTER HOUSING – Remove & Replace – Automatic Trans
    • REPLACE THE COOLANT BYPASS HOSE
     
    Gary G. gave our service a 5 star review on 7/18/2024
  • 2015 BMW 328i

    BMW 328i
    Mileage
    74,683
    Service Date
    6/21/2024
    Services Performed
    • RECOMMENDED FRONT 32 REAR 36 PRESSURE IN LF 30 RF 30 LR 34 RR 35 PRESSURE OUT LF 32 RF 32 LR 36 RR 36
    • Service air conditioner. Check condition of all lines for damage and leaks. Check the compressor (when accessible) for damage, missing hardware or leaks. Verify the compressor is not seized or locked up. Check service ports for missing caps, damaged threads and conformance with labeling. Inspect the condenser coil for damage, restrictions or leaks. Inspect the expansion device (if accessible) for physical damage or leaks. Inspect the accumulator receiver drier and in-line filter for damage, loose or missing hardware or leaks. Inspect the drive belts and pulleys. Inspect the fan clutch for leakage, bearing wear and proper operation. Inspect the cooling fan for bent or missing blades. Inspect accessible electrical connections for loose, burnt, broken or corroded parts. Pressure test the system at a minimum of 50 PSi. Verify the operation of the compressor clutch, blower motor and air control doors for proper operation. The high and low side operation pressures are as follows: Low 28 High 185. The temperature from the center vent upon completion is 40 degrees.
     
    Elizabeth R. gave our service a 5 star review on 6/27/2024
  • 2016 BMW X1

    BMW X1
    Mileage
    94,576
    Service Date
    6/27/2024
    Services Performed
    • RECOMMENDED FRONT 36 REAR36 PRESSURE IN LF36 RF36 LR36 RR36 PRESSURE OUT LF36 RF36 LR 36 RR36
    • Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
     
    Anne C. gave our service a 5 star review on 6/27/2024
  • 2019 BMW 430i

    BMW 430i
    Mileage
    40,358
    Service Date
    6/11/2024
    Services Performed
    • RECOMMENDED FRONT 38 REAR45 PRESSURE IN LF34 RF36 LR42 RR43 PRESSURE OUT LF38 RF 38 LR45 RR45
    • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
     
    Lolita H. gave our service a 5 star review on 6/14/2024
  • 2013 BMW 335i

    BMW 335i
    Mileage
    100,305
    Service Date
    6/5/2024
    Services Performed
    • RECOMMENDED FRONT32 REAR38 PRESSURE IN LF 26 RF26 LR 32 RR32 PRESSURE OUT LF32 RF32 LR38 RR38
    • Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
    • The lights are working at this time. Scan the system. No codes. The light will need to be not working to go farther.
    • CONTROL ARM – Remove & Replace – Sedan Lower,Control Arm,Both Sides – [DOES NOT include alignment.]
    • (Combination) – CONTROL ARM BUSHING – Remove & Replace Each
    • (Combination) – CONTROL ARM BUSHING – Remove & Replace Each
    • OIL PRESSURE SENDER OR SWITCH – Remove & Replace
     
    Faris F. gave our service a 5 star review on 6/5/2024
  • 2008 BMW 528i

    BMW 528i
    Mileage
    88,591
    Service Date
    5/14/2024
    Services Performed
    • RECOMMENDED FRONT32 REAR36 PRESSURE IN LF30 RF30 LR26 RR34 PRESSURE OUT LF32 RF32 LR36 RR36
    • Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
    • CHECK FOR ANY SERVICE DUE
    • CABIN AIR FILTER – Remove & Replace
    • AIR CLEANER ELEMENT – Remove & Replace
     
    Lynette T. gave our service a 5 star review on 5/14/2024
  • 2011 BMW 135i

    BMW 135i
    Mileage
    104,849
    Service Date
    5/6/2024
    Services Performed
    • RECOMMENDED FRONT 32 REAR38 PRESSURE IN LF32 RF32 LR38 RR38 PRESSURE OUT LF32 RF32 LR38 RR38
    • Scanned DME and found codes as follows: 2774 – Air Mass Plausibility, AIir Mass too High 2906 – Intake Leak Suspected 2C57 – Charge Pressure Control The Charged Air Pipe is broken. Recommend replacing.
    • REPLACE THE CHARGED AIR PIPE
     
    Chris B. gave our service a 5 star review on 5/10/2024
  • 2007 BMW 328i

    BMW 328i
    Mileage
    140,060
    Service Date
    5/3/2024
    Services Performed
    • RECOMMENDED FRONT 32 REAR36 PRESSURE IN LF31 RF30 LR35 RR34 PRESSURE OUT LF32 RF32 LR36 RR36
    • Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
     
    Sophia P. gave our service a 5 star review on 5/4/2024
  • 2017 BMW 430i Gran Coupe

    BMW 430i Gran Coupe
    Mileage
    65,893
    Service Date
    4/18/2024
    Services Performed
    • RECOMMENDED FRONT 32 REAR38 PRESSURE IN LF26 RF26 LR32 RR32 PRESSURE OUT LF32 RF32 LR38 RR38
    • TEST THE BATTERY AND REPLACE AS NEC.
    • REPLACE BATTERY incl Programming
     
    Robert F. gave our service a 5 star review on 4/18/2024
  • 2013 BMW X3

    BMW X3
    Mileage
    107,152
    Service Date
    2/22/2024
    Services Performed
    • RECOMMENDED FRONT32 REAR35 PRESSURE IN LF26 RF28 LR29 RR29 PRESSURE OUT LF32 RF32 LR35 RR35
    • Scanned DME and found codes as follows: Ambient Temperature Senor Mass Air Flow THe temperature sensor code is due to the sensor not being plugged in. The mass airflow code clears and does not return at this time.
    • The sensors were unplugged.
    • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
     
    Lorelei T. gave our service a 5 star review on 2/22/2024