2016 Audi Q5
Mileage
125,641
Service Date
1/8/2025
Services Performed
- RECOMMENDED FRONT33 REAR33 PRESSURE IN LF33 RF33 LR33 RR33 PRESSURE OUT LF33 RF33 LR 33 RR33
- Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
- ADBLUE FLUID – ADD – [Fill completely with fresh fluid and adapt learned values for AdBlue tank under guided fault finding after filling fluid.] AIR CLEANER SCREEN – CLEAN – [Clean snow screen for air cleaner.] SLIDING ROOF – CLEAN – [Clean guide rails and lubricate with grease.] BRAKE SYSTEM – INSPECT – [Check for damage and leaks. Check thickness of pads and brake fluid level.] COOLING SYSTEM – INSPECT – [Check coolant level, add if necessary.] DRIVE BELTS – INSPECT – Ribbed V-belt – [Check condition and replace if necessary. Check tension of belt drive with a manual tensioner and retention if necessary. (rear most belt).] DRIVESHAFT BOOTS – INSPECT ENGINE – INSPECT – [Check engine compartment for leaks.] EXHAUST SYSTEM – INSPECT – [Check for damage/leaks.] FINAL DRIVE OIL – INSPECT – [Auto and Manual transmission, check for damage/leaks.] HORN OPERATION – INSPECT – [Check function and condition.] LIGHTS & CONTROLS – INSPECT – [Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, ba& Pollen Filter AIR FILTER – REPLACE CABIN FILTER- REPLACE SERVICE INTERVAL INDICATOR/DISPLAY – RESET TIRE PRESSURE MONITORING SYSTEM SENSORS – RESET VEHICLE – ROAD-TEST – [Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.] TIRES – ROTATE SPARK PLUGS – REPLACE BATTERY – INSPECT – [Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.] POWER STEERING FLUID – INSPECT
- Replace front brake pad linings. Check front brake disc rotor condition. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
- Replace rear brake pad linings. Check rear brake disc rotor condition. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Brian D. gave our service a 5 star review on 1/9/2025
